We have a range of accessories and fixings to match our roofing and cladding solutions, from screws, nails, ridges and verges.
From
£9.60
Onduline Wood Screws have been designed to be used with our bitumen Onduline roof sheets and Onduvilla tiles and can be used on soft or hard woods.
£7.20
ONDULINE Universal Screws are available in the five ONDULINE colours: Black, Red, Green, Brown & Grey.
£14.40
Our Onduline Circular PE nails are available in the four Onduline colours: Black, Red, Green & Brown.
From
£4.20
Our Onduline Circular nails are available in the four Onduline colours: Black, Red, Green & Brown.
£3.00
Designed for the Ondutile system and used in conjunction with the Eaves Ventilator Strip, it protects the eaves batten from possible water ingress whilst also providing an aesthetically pleasing finish to the eaves detail.
£0.80
Designed to match the ONDULINE CLASSIS profile, these polyethylene units seal the corrugations at eaves and ridge, preventing the ingress of water, dust and draughts.
£4.00
Onduline eaves trays are manufactured using a durable UPVC sheet with pre-formed fold lines to form a 75mm or 100mm drip edge into the gutter. It is used for Onduline, Ondutile and Oversheeting roof systems.
£4.00
The Ventilator Strips are used to allow ventilation into the roof space whilst preventing the infiltration of birds and large insects into the eaves. They are secured by nailing with galvanised round headed nails.
£9.58
Onduline apron flashings are designed to seal the gap between Onduline roof sheets and vertical wall abutments. Suitable for any pitch of roof.
From
£15.00
Manufactured from the same material and to the same high specification as ONDULINE roofing sheets.
£96.00
The Onduline skylight/roof window provides light and air to the roof.
£15.00
Manufactured from the same material and to the same high specification as ONDULINE CLASSIC sheets.
£4.20
Our ONDULINE MINI PROFILE nails are available in Black, Red & Green.
£0.80
Designed to match the ONDULINE MINI PROFILE, these polyethylene units seal the corrugations at eaves and ridge, preventing the ingress of water, dust and draughts.
£9.58
Apron flashings are designed to seal the gap between Mini Profile sheets and vertical wall abutments.
From
£4.20
Our large and flexible ONDUVILLA ridge piece.
From
£3.00
Cap for ridge and hips, for roofs with a pitch up to 31 degrees.
From
£3.17
Designed for the finishing of ridge and hip lines (pitch up to 31 degrees).
From
£2.47
Designed to provide a watertight seal and ventilation to the ridge line, for roof pitches up to 31 degrees.
From
£2.63
Designed to provide a neat weatherproof seal at the edge of the roof.
£4.46
ONDUVILLA Vent Foam Filler Pack (2 Eaves/2 Ridges)
£15.00
Slim verge to be used with the full range of Onduline’s bituminous corrugated sheets. Made from the same quality material as Onduline sheets, 3mm thick and 100cm in length.
£18.20
ONDULAIR 300/390 from Onduline is a ridge sealing tape which is designed to combine excellent waterproofing and ventilation properties.